Shell Shorts

A concise history of the Eames Shell Chairs and something of how they get the way they are today.


Written by: Amber Bravo

The yellow shell of an Eames-designed chair sits on a workbench.

The story of the Eames Plastic Shell Chair really began more than ten years prior to Charles and Ray’s 1950 debut of their now iconic design for Herman Miller. Understanding this decade-long evolution not only helps shed light on Charles’ oft-quoted—“The details are not the details. They make the design”—it says a lot about the responsibility Herman Miller and the Eames Office and family have assumed at Charles and Ray’s request, to stay true to the designers’ tireless drive to improve and refine their designs.

The Eameses were notoriously material agnostic, and the seeds of the plastic shell we know and love today were really planted in the late ’30s, when Charles and Eero Saarinen first began exploring plywood seating in curved forms at Cranbrook Academy of Art, where Charles served as the head of the design department. Saarinen’s father, Eliel, was the head of Cranbrook and Eero was a junior partner at his father’s architecture office. It is likely that both Eames and Eero were influenced by the work of Finnish architect Alvar Aalto, who’d lectured at Cranbrook in the early ’30s and was well known for his bent plywood furniture. Eames and Saarinen’s first attempt at shaping plywood was realized in a chair concept for Eliel’s design for the Kleinhans Music Hall in Buffalo, NY, in 1939. While that chair had two-dimensional curves, their next design, an entry for The Museum of Modern Art’s “Organic Design” competition in 1940 had three-dimensional curves. For this they won first prize, but it was only produced in very limited numbers and not anywhere near to their desired quality. By this time, Charles had met and married Ray Kaiser, a student at Cranbrook, and the two moved to Venice, California to open their eponymous office. Eero abandoned the project, but Charles and Ray were determined to figure out a completely new process for molding plywood into compound curves.

Charles and Ray continued to experiment with their new technique for molding plywood, and their efforts yielded stretchers, lightweight, stackable leg splints (1942), and a glider seat (1943) for the U.S. Navy. When the war ended, they returned to the concept of a mass-produced chair. Despite their best efforts, they were still unable to produce a single-shell plywood form, but instead landed on a compelling alternative: a chair comprised of separate molded plywood panels for the back and seat, which would become the Eames Molded Plywood Chair (1946), which is still in production today and was subsequently named “Best Design of the Century” by Time magazine. Two years later, they produced a single form shell chair made out of stamped metal for Museum of Modern Art’s “International Competition for Low-Cost Furniture Design.” It took second place in the competition, but the, neoprene-coated prototype was too costly to produce, so Charles and Ray began looking into new materials like plastic reinforced with fiberglass, a material that could be molded into organic shapes and produced cost effectively , but had not yet been used in a consumer application before.

It was this iteration—released in 1950—that went on to become the first mass-produced plastic chair, but it was not the end of the design’s evolution. Through the years, color and height options, shock mounts, base variations, and choices of upholstery have redoubled, making the chair not only easily reproducible but also highly customizable. Manufacturing processes have also been closely monitored and modified, and, in the late 1980s, almost a decade after Charles’ death in 1978, the environmental implications of fiberglass production were called into question by Ray and Herman Miller. By the early 1990s, Herman Miller ceased production. After years exploring more sustainable solutions, the company reintroduced the Molded Plastic Shell Chair in 100% recyclable polypropylene in 2001, based on prototypes in the Eames Office archives, which Charles and Ray had made with fiberglass-free plastic in the 1970 . In 2013, again working with the Eames Family, Herman Miller realized Charles and Ray’s vision for the shell chair design in a new and quite appropriate material—molded wood, thanks to advancements in the 3D veneer technology, and this year, the company has reintroduced the Shell Chair in a sustainably reformulated, GREENGUARD Gold Certified molded fiberglass as well as in upholstery.

Taking off where the Eames left off with their 1970 film, “The Fiberglass Chairs: Something of How They Get the Way They Are” WHY revisits the fiberglass production process in our fiberglass manufacturing facility in Ashtabula, OH and in Herman Miller’s own Greenhouse facilities in Zeeland, MI, in ten bite-sized videos, which we’ll be releasing over the course of two days on Instagram (along with some corresponding gif trailers below) and exploring the ways in which Herman Miller is honoring the Eames original design and ethos by pushing the manufacturing process and quality to be the best and most sustainable it can possibly be.

“The Eameses were notoriously material agnostic, and the seeds of the plastic shell we know and love today were really planted in the late ’30s, when Charles and Eero Saarinen first began exploring plywood seating in curved forms at Cranbrook Academy of Art.”

Newly reformulated colored resin is mixed in vats.

1. Colored resin is mixed in vats

By employing technology used mainly in the automotive and manufacturing industries to create non-cosmetic performance parts, Herman Miller’s new fiberglass resin boasts many environmental improvements. Monomer-free and processed without VOC (volatile organic compounds) or HAP (hazardous air pollutants) emissions, this resin eliminates the need for thermal oxidizers. Compared to current conventional fiberglass resin production and to the fiberglass resins used in the original chairs, the new monomer-free resin produces less ozone and air pollution and results in a safer work environment for employees.

View on Instagram

Preforms are removed from the CNC machine and inspected.

2. Preforms are moved from the CNC machine and inspected

To create preforms for the new Shell Chairs, a “dry binder process” is used as opposed to the “wet process” used in conventional fiberglass production. In a “dry binder process”, fiberglass strands, some of which melt at a lower temperature, are blown by a CNC machine onto a screen in the shape of a shell; a vacuum ensures that loose particles are contained instead of being blown into the air and captured by the “wet glue”, like they are in conventional manufacturing. Heat is then applied and enough strands melt so that the preform’s shape remains. It is only at this point that human hands touch the preform, and all that’s needed to be done is an inspection of the preform on a light table and some trimming and scraping of the preform edges with a knife.

View on Instagram

Preform is set in cradle and the new environmentally safe resin is applied by hand.

3. Resin is applied to preform

The fiberglass preform is set in a cradle. Workers weigh the resin to an exact amount on a scale, and then pour the resin over the fiberglass preform deftly coating and smoothing over the shell systematically with a tool by hand.

View on Instagram

Resin-coated preform is placed in press.

4. Resin-coated preform is placed in press

Once the resin has been evenly applied to the preform, the shell is moved on to the press, where a combination of heat and pressure are applied to the resin-coated preform. The press cuts along the contour of the chair to eliminate excess fiberglass prior to sanding.

View on Instagram

Shell is inspected.

5. Shell is inspected

Any excess preform that still clings to the chair after being cut by the press is manually removed, and the shell is taken out of the press and visually inspected and signed off on by the factory worker. The press is then cleaned after each use.

View on Instagram

Shell edges are sanded.

6. Shell edges are sanded

The edges of the shell are sanded manually and then finished with an electric sander. The chair is then wiped down and bagged. From here, it’s inspected one more time by a different factory worker who is searching for imperfections. After it passes inspection, it is sent to the Herman Miller Greenhouse facility.

View on Instagram

Shell chairs are cleaned in preparation for the glue to adhere to shock mounts.

7. Shockmounts are applied to the base of the shell

The base of every shell is systematically cleaned in order to adhere the shock mounts most effectively. Adhesive is applied to each shock mount by a machine, and a tray carrying the newly cleaned shell is set down on the shock mounts. The shock-mounted shells are set to cure on a pressurized drying rack for two days.

View on Instagram

Shock mounts torqued and tested.

8. Shock mounts are torqued and tested

The shockmounted shells are taken off of the curing rack for testing and inspection. Each shock mount is manually torqued and if it passes muster, the shell is signed off on the factory floor.

View on Instagram

Sewing to the hopsack pattern.

9. Sewing to the hopsack pattern

Upholstery is cut from computerized “butter cutter” and then hand sewn into its appropriate patterns (either armchair or side chair format). The patterns are then sent to the chair cell.

View on Instagram

Upholstery fitted onto chair.

10. Upholstery fitted onto chair

Foam padding is attached to the chair, over which the sewn and assembled upholstery is fitted and attached by the J-Channel (or edge trim). From there, it is ironed and placed in another press that applies heat and pressure.

View on Instagram

Bases attached.

11. Bases are attached to the shell

Each shell chair is labeled with a sticker specifying for a unique base. The bases are then selected and attached on each individual chair and secured by hand.

View on Instagram

Boxing and shipment.

12. Boxing and shipment

Each fully assembled shell chair is wiped down, bagged, and packaged for shipment.

View on Instagram